100CR6 4130 Carbon Steel Tube Fittings Carbon Steel Round Pipe 0.5mm

Tube Fitting Carbon Steel Low Carbon Steel Pipe 100CR6 Steel Pipe

100Cr6 bearing steel has good toughness, good tempering stability and small deformation during heat treatment. The carbides in the steel are evenly distributed, and it is not easy to precipitate carbide networks, and it is easy to eliminate them by normalizing. The network and coarse carbide structures can be eliminated by normalizing. However, the compressive strength and abrasion resistance are insufficient and the processability is poor. When the residual carbon content on the surface of the steel is 0.6% - 0.7%, the overheating sensitivity of the surface layer increases due to the reduction of carbides. After normal heating and quenching, the surface hardness can still reach 60-62hrc, but the bending strength decreases by 40% - 50%. The grain size of the surface layer is grade 7 and that of the core layer is grade 10.
The steel has good forging performance, and needs to be heated in neutral atmosphere or protective atmosphere furnace due to easy decarburization. Fine tempered sorbite structure can be obtained by forging heat quenching and tempering treatment, which simplifies the process, saves time and electricity, has both good cutting performance and ideal waste heat treatment structure.

100CR6 Carbon Steel Tube Fittings

4130 Carbon Steel Tube Fittings

Carbon Steel Round Pipe 0.5mm

100CR6 4130 Carbon Steel Tube Fittings Carbon Steel Round Pipe 0.5mm Images